 |
| Product Name£º |
TPU BALL |
| Description£º |
TPUs do not have quite the heat resistance and compression
-set resistance of the thermoset type of polyurethanes but most other properties are similar. Thermoplastic polyurethanes come in a wide range of hardness grades. Among elastomers, urethanes have outstanding abrasion resistance, low temperature flexibility is good, oil resistance is excellent, and urethanes rank among the best for load
-bearing capability. Additives can improve dimensional stability and heat resistance, reduce friction, and increase flame retardancy, fungus resistance, and weatherability. Urethanes are a reaction product of a di
-isocyanate and long and short chain polyether, polyester, or caprolactone glycols. The polyether types are slightly more expensive and have better hydrolytic stability and low
-temperature flexibility than the polyester types. However, mechanical properties of the polyester type are generally higher. The caprolactones offer a good compromise between the ether and ester types |
|
 |
| Product Name£º |
DELRIN Balls |
| Description£º |
DELRIN Balls (ACETAL RESIN
- POM) is similar to nylon but slightly harder and denser. Recommended for applications where these properties and low water absorption are required. Balls made of these materials are often used for sliding fittings of tables and drawers, furniture bearings, rollers, valves and elec¬tronic components, sailing boat fittings. |
|
 |
| Product Name£º |
Polytetrafluorethylene Balls |
| Description£º |
Teflon are a well
-known non
-friction material which is resistant to most corrosive agents and is electrically nonconductive. Teflon is particularly suitable for use in apparatus designed to handle cryogenic liquids and acids. its properties remain at a useful level over a wide temperature range of
-180¡ãC to 250¡ãC. |
|
 |
| Product Name£º |
Polyethylene Balls |
| Description£º |
Polyethylene Balls (High Density) is an FDA approved plastic. It is more stress crack resistant than Polyethylene Low Density. |
|
 |
| Product Name£º |
Polypropylene Balls |
| Description£º |
Excellent chemical resistance, low specific weight (less than water) and the highest melting point of thermoplastics. It is an excellent electrical insulator and has a low dielectric constant coefficient. It is often used where the capacity to float on fluids in general is required. It is ideal for equipment used for blood transfusions, level indicators and deodorant roll
-on sticks. It is highly resistant to chemical substances, such as acids, alcalis, alcohols and many inorganic substances, saline solutions, solvents, gasoline (petrol), water, oils, greases, detergent, fruit juices and milk. It is not resistant to aromatic hydrocarbons and chlorates. |
|
 |
| Product Name£º |
Nylon Balls |
| Description£º |
Nylon Balls (Zytel®, Polymide£¬PA) is used in check valves, light load bearings, knobs and toggle switches and other applications where low cost and resiliency are more important than hardness. Nylon has good resistance to alkalis, petroleum products and various mild chemicals. |
|
 |
| Product Name£º |
Polyamide-imide Balls |
| Description£º |
Polyamide
-imide Balls (Torlon) has one of the highest resistance to heat of all the plastics. It also has high strength, dimensional stability and impact resistance. It is designed for bearing and wear applications. |
|
 |
| Product Name£º |
Acrylic Balls |
| Description£º |
Acrylic Balls (Lucite, Plexiglass)has high optical quality and tensile strength. It also has a high resistance to heat distortion and has a highly polished finish. |
|
 |
| Product Name£º |
Polyurethane Balls |
| Description£º |
Polyurethane Balls are a relatively soft material that provides a good seal at low pressure in non return valves and excellent wear resistance. Polyurethane is not recommended for use with acids and alkalis. |
|
 |
| Product Name£º |
PVC |
| Description£º |
PVC is the most widely used member of the vinyl family. It is most commonly used in pipe and fittings. PVC offers excellent corrosion and weather resistance. It has a high strength
-to
-weight ratio and is a good electrical and thermal insulator. PVC is also self
-extinguishing per UL flammability tests. PVC may be used to temperatures of 140¡ãF (60¡ã C). |
|
 |
| Product Name£º |
Stainless Steel Ball |
| Description£º |
application.Corrosion Resistance Comparison: 316>304/302>430>420/440 |
|
 |
|
 |
|
 |
| Product Name£º |
Glass Balls |
| Description£º |
Types Full or hollow balls, floating, abrasive or magnetic balls, coated, coloured or transparent balls. Finishing Ground, polished, drilled balls; engraved or silk
-screened ball |
|
 |
| Product Name£º |
Hollow Balls |
| Description£º |
Types Full or hollow balls, floating, abrasive or magnetic balls, coated, coloured or transparent balls. Finishing Ground, polished, drilled balls; engraved or silk
-screened ball |
|
|
Product Category 
Product List